|
|
|
Precision-Crafted Bullets for Competition
Available in 6mm and .22 caliber
Bart's OriginalA small bullet measuring .24325 on the pressure ring and .2428 on the body. The bullet is a straight shank with no taper and is nearly an 8 ogive. It has close to the same amount of bearing surface as do most Benchrest bullets. Available in 66 and 68 grain flat-base. $245.00 + shipping (1000)
The WEDGEA large,
tapered bullet, which measures .2439 on the pressure ring and starts large on
the body at .2438 and quickly tapers off. It is a double radius bullet which
starts as a 9 ogive in the back and then blends into a 6.5 in the front. It is a
short bearing surface bullet. $245.00 + shipping (1000)
Bart's ULTRAA medium
sized, tapered bullet, which measures .2435 on the pressure ring and starts as
.2434 on the body and tapers off. Like the Wedge, it is a double radius bullet -
9 ogive in the back and then blends into a 6.5 in the front. It has about .040
more bearing surface than the Wedge. Available in 66 and 68 grain flat-base. $245.00 + shipping (1000)
"Headhunter-6"Headhunter-6 is a tapered, double radius 6mm bullet measuring .2435 on the pressure ring. The bullet is similar in design to the Ultra and has already proven to work well in a great variety of barrel and reamer combinations. *If, after shooting any Headhunter-6 bullets, you experience an erection that lasts more than 4 hours, you should see your doctor immediately. $245.00 + shipping (1000)
|
|
For the Finest in Craftsmanship and Function Bart recommends Custom Crafted Cartridge Boxes by Derreld Hallenbeck Designs
Send email to
Bart with questions about
bullets or shooting, or to place orders.
|